Create Mac Bootable USB from Windows [Full Guide in 2024]

If you want to create Mac bootable USB from Windows, this article will help you. In this article, you will learn why you need to create Mac bootable USB from Windows, rescue data that cannot boot from software, and answer some frequently asked questions.

You should know how to create a bootable Mac USB and not wait until there is a problem with your Mac. As with every other machine, there might come a time in their life cycle when your Mac device goes beyond repair.

Due to file corruption, severe hardware breakdown, or continuous recurring faults, you may finally have to let it go. While you hope it will not happen, you would need all your data safe and sound if it ever comes to it.

However, using an Apple device doesn't stop you from creating a Mac bootable USB from Windows 10.

The reasons you need to do this are valid for both you and the safety of your data, such as:

• Use your Mac Bootable installer to troubleshoot your malfunctioned Mac.
• Have a backup data file in cases of emergency or unexpected Mac failures.
• Install the earliest version of macOS on your Mac easily when you want.
• Installing the latest versions of macOS on various Mac devices without downloading them individually etc.

Let's move on to how you can rescue data that cannot boot with software.

Rescue Data from Mac That Cannot Boot with Software

Data safety has to be the most important thing to look out for regarding various devices. With EaseUS Data Recovery Wizard for Mac, you can recover files from Mac won't boot, recover accidentally deleted files, and rescue data from a dead hard drive or damaged hardware.

Irrespective of what device you use or how you lost your data, you should be able to recover it entirely, and EaseUS Data Recovery Wizard for Mac users helps you do just that. Scenarios such as a virus attack, hard drive damage, operation error, or a macOS being wrongly installed can all be solved by the EaseUS Data Recovery Wizard for Mac software.

The EaseUS data recovery program also allows you to preview recovered files for the files you deleted intentionally. The best part would be the ease of use and navigation, which this next step would help you with, so keep reading.

Following these few easy steps helps you use this software easily while gaining the best results. These steps include:

First, you need to enter the Recovery Mode on Mac:

For Apple Silicon Macs: Shut down your Mac, press and hold the power button (Touch ID) until you see "Loading startup options". Select "Options" and click the "Continue" button to enter the macOS Recovery Mode.

For Intel-based Macs: Completely turn off your Mac and turn it on when pressing "Command + Option + R" together. Hold these keys until you see a spinning globe on your Mac's screen.

Step 1. Launch EaseUS Software in Recovery Mode

Select "Utilities > Terminal" from the top menu, and enter the command sh <(curl https://d3.easeus.com/mac/boot.sh). Hit "Return". Wait for the application to open, and it will take several minutes.

Note: If the Terminal displays either "No such file or directory" or "Could not resolve host," you should verify that the command line you entered is correctly spelled, ensure your Mac has a stable internet connection, and confirm that your macOS version is not lower than macOS 10.15.

Step 2. Select the Volume on Your Mac Hard Drive

Select the volume where your lost data is stored, and click "Search for lost files". The EaseUS software will quickly locate all the recoverable data on the selected volume.

Step 3. Choose the Lost Data You Want

EaseUS software categorizes the scanned recoverable data by file type and storage path. Find the data you want by clicking "Type" or "Path" in the left panel. Then, check the boxes in front of the data you want to recover.

Step 4. Recover and Save Data on an External Disk

Click the "Recover" button, and a pop-up window will show up saying, "Please select a target location to save". Choose the external disk as the new storage location of your recovered data.

How to Create Mac Bootable USB from Windows

Having proven how important and useful this is, in this section, you will learn in detail how to do so. The video below offers a thorough and simplified guide to help you create a Mac bootable USB from Windows.

This simplified video guide will give you all the necessary information and a practical walkthrough of what you will do. Watch it now, and check the following highlights:

• 02:26 Run Command Prompt on your computer
• 03:40 Download TransMac from the Internet
• 04:10 Download macOS DMG files

1. How to Create a GPT Partition on a USB Drive

If you want to create Mac bootable USB from Windows, you must create partitions on your USB drive. Creating a GPT partition will enable you to manage your drive easily, amongst other benefits, and it's effortless. Follow the steps below to create a GPT Partition on a USB Drive:

Step 1. Go to Start on your PC and search for Command Prompt. Right-click on the top result and select 'Run as an administrator.'

Step 2. Open the "diskpart" and click "list disk" to view your USB drive.

Step 3. Select your USB disk and press Enter.

Step 4. Select the "Clean" option to clear your disk.

Step 5. Select and click the "Convert GPT" command.

Step 6. Click the "Create Partition Primary", and the process is complete.

2. How to Create a Mac Bootable USB with UltraDMG on Windows

A Mac bootable USB can always be prepared to run directly on your Mac device. However, if your Mac isn't bootable now, you can always create a Mac bootable USB with UltraDMG on Windows. You can do this on Windows 7, 10, and 11.

To carry out this action, you will need the basics, such as a macOS DMG file, a USB Drive with over 16 GB storage, a trial copy of SysGeeker UltraDMG, and a Windows PC to run it on. The steps below will help you create a Mac Bootable USB with UltraDMG on Windows, taking the latest macOS Sonoma as example.

Step 1. Insert an empty USB Drive into your Windows PC.

Step 2. Download the UltraDMG software on your PC from the link and install the software.

Step 3. Open UltraDMG from the Desktop on your PC, and click on the "Next" button at the right side of the "Burn" menu. You will be redirected to a new window at this time.

Step 4. You are now at the place where you can create a macOS bootable USB. Please click the "Browse" button to import the macOS dmg file into the software.

Step 5. You will see the USB name at the same time. If the USB name is not correct, please click the "Change" button to pick up the right one from the list.

Step 6. Click on the "Burn" button at the bottom to start burning macOS dmg file to the USB drive. Once it is done, you will get a bootable USB drive for macOS installation.

3. How to Boot Mac with the macOS Bootable USB

Most of the work is already done by creating Mac bootable USB from Windows. Follow these steps to continue.

Step 1. Insert the bootable USB into any open USB slot.

Step 2. Press the Power button to turn on your Mac.

Step 3. Once the startup chime begins, press and hold the Option key down. This gives you access to OS X's Startup Manager. Release the Option key immediately after the Startup Manager screen appears. At this point, the utility will open any available drive with bootable content.

Step 4. Select the USB drive you want to boot from and either double-click or press the return key. Your Mac begins to boot immediately.

Summary

In this article, you have learned how to create Mac bootable USB from Windows and how to recover lost data. Losing data is a nightmare no one wants to go through, which makes the EaseUS Data Recovery Wizard for Mac the best fit for you. It helps you recover from as little as a Word document to numerous photos, pictures, and videos with few straightforward steps.

Create Mac Bootable USB from Windows FAQs

In this article, you have learned how to create Mac bootable USB from Windows and how to recover lost data. Here are a few questions that are found to be recurring and answered in detail

1. How do I make a bootable DMG file in Windows 11?

Here are the steps required to burn a DMG file on a Windows PC:

1. 1. Begin by running PowerISO, and insert a blank or rewritable disc in the drive.
2. 2. Select the "Tools" bar, then click "burn."
3. 3. The "DMG Burner" dialogue pops up while the DMG file starts burning on the disk.
4. 4. Take the disc with the burnt DMG file to where you want it.

2. Can you boot macOS from a USB drive?

Yes, you can boot Mac from a USB flash drive. Here is how you do it:

1. 1. Insert the USB drive and power on the system.
2. 2. Once the system chimes, press and hold down the Alt key.
3. 3. When the startup manager appears, select the USB drive with the startup disk.
4. 4. Your device begins to boot off the USB drive.

3. What format does a bootable USB need to be for Mac?

A bootable USB for Mac should be in APFS format. The APFS is the original default file format used on macOS. The APFS isn't compatible with the older versions. You might need a macOS X Extended if you are using an older macOS version.

4. Can I create Windows bootable USB on Mac?

Yes, you can create a Windows bootable USB on your Mac. Here is how you to

Download the Windows 10 ISO file to your Mac and insert your USB drive.

1. 1. Use the "diskutil" command to identify which drive your USB is mounted on.
2. 2. Format the USB to work with Windows.
3. 3. Use "hdiutil" to mount the Windows 10 folder and proceed to prepare it for transfer.
4. 4. Copy the Windows 10 ISO over to your USB drive.
5. 5. Put your USB into your new PC and start loading Windows.