This article deals in great detail with the problem of file transfer either slowing down or coming to a complete zero in Windows 10. Simply follow this article to fix file transfer speed drops to zero or copy speed 0 bytes issue right now.
"I have a mini PC with Windows 10 64-bit pre-installed. When I set it up this weekend and copy files to my USB drive, the speed is abysmal. It fluctuates wildly during copy or move. The USB transfer speed rarely exceeds 10MB/s, dropping to 0 every few seconds and hanging for a few minutes. It can take me hours to copy a folder with lots of files, and most of the time is wasted. Can someone help me?"
If you have the same issue, how to fix file transfer speed drops to zero on Windows 10? Here is all the solutions' outline.
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Fix 1. Change the USB Port 3.0 | If the USB drive supports USB 3.0/3.1, make sure you plug it inside a USB 3.0/3.1 port...Full steps |
| Fix 2. Update All Drivers | Click open EaseUS DriverHandy and click the blue button to scan your drivers...Full steps |
| Fix 3. Format FAT32 to NTFS | Reformatting your USB drive or external drive in the NTFS format instead of FAT32 can be useful...Full steps |
| Fix 4. Optimize Drives | If you have external hard drive transfer speed drops to 0 issue, optimizing drives can be effective...Full steps |
| Fix 5. Disable Windows Auto-Tuning | If you are copying some data over the network, the auto-tuning feature plays a role. Disabling...Full steps |
| Fix 6. Disable Remote Differential Compression | You can solve the copy speed 0-byte issue by disabling the Remote Differential Compression feature...Full steps |
Windows 10 has proved to be one of the most popular and stable operating systems to have seen the light of the day. Despite its extreme popularity, it also gets bogged down by its fair share of errors. One of the most persistent errors is the file transfer to a drive, a USB, or over the network, which either stops or suffers extreme lags while processing.
This page will provide workable methods to solve the USB transfer speed drops to 0 problems. Let's check them out right away.
To solve file transfer speed drops to zero on Windows 10 when copying, ensure you have Windows 10 updated to the latest version. Besides, check the antivirus that can cause slow file transfer speed on your PC. You can temporarily disable the antivirus to copy the data to memory and re-activate it again when copying finishes.
After these two fixes, continue to use the practical methods below to figure out.
Your computer has a variety of USB ports. If the USB drive or external hard drive supports USB 3.0/3.1, plug it inside a USB 3.0/3.1 port. A USB 3 port is usually blue. Switching to a proper port would improve copy speeds drastically and solve the copy speed 0 bytes problem.
Windows prefers to install its own drivers for computer peripherals, whereas using other drivers can sometimes decrease file transfer performance. You may like to know EaseUS DriverHandy, a professional driver manager. It can help you find the most suitable driver and update all your drivers automatically. Now, download it to try.
Step 1. Launch EaseUS DriverHandy on your desktop.
Step 2. Find the drivers you want to update and click "Update."
Sometimes, a drive's copy speed shows 0 bytes because it isn't formatted to a proper file system. So, you can format your USB drives or external hard drives from FAT32 to NTFS. This solution works for some.
EaseUS Partition Master is a popular disk partition management tool that is available for all disk or partition-related jobs such as format disk partition as well as other full-around disk management solutions:
Tip: Before you format your USB drive or other devices to fix the "file transfer speed 0 bytes" issue, you'd better back up your data to avoid data loss.
With Windows's built-in disk defragmentation utility, you can rearrange the files on a disk to occupy continuous storage space, speeding up file access and fixing USB transfer speed drops to 0 issues. To optimize your drives:
If you copy some data over the network, the auto-tuning feature can improve the performance of programs that receive TCP data over a network. However, disabling this feature might bring a faster copy speed in some situations.
Step 1. Press the Windows key + X and select Command Prompt(Admin).
Step 2. Type netsh int tcp set global autotuninglevel=disabled and press Enter.
Step 3. Now try to transfer the files and check the data transfer speed. You can go to Command Prompt(Admin) again and type netsh int tcp set global autotuninglevel=normal and press Enter to turn on the Auto-tuning again.
The Remote Differential Compression task compresses data before sending it over the network. This takes a considerable amount of time and can lead to congestion. Speed up the file copying, moving, or deleting process by disabling this process.
The above are some of the best ways to fix file transfer speed drops to zero in Windows 10 and increase the speed of the copy-paste process for files. These methods will also work with USB
and external hard drive mobile transfers to the computer. File transfer speed is affected by various factors, so you can try all the possible ways until the problem is solved.
The three frequently asked questions about PC or USB file transfer speed drops to zero on Windows 10. How do we fix the issues? Check the brief methods for these problems.
Why does USB transfer speed drop?
The fact that you observed a drop in speed shortly after writing the USB key is likely because the operating system's writes have been buffered. For performance reasons, your operating system does not write directly to the USB key but now to the so-called buffer cache, assuming there is no need to write to the file immediately.
In most cases, it is perfectly fine to cache the write and write it later in the background (this is true for hard drives, but not necessarily for USB keys). This decline was caused by writing larger data in batches, and your operating system decided that it should no longer write to the buffer cache.
Why is copying files so slow in Windows 10?
Why does my file transfer stop? The main reasons why the copying speed drops to 0 or why the speed of copying files to a USB is very slow can be:
How do I speed up copy and paste in Windows 10?
How to speed up file transfer in Windows 10? Try these tips:
Related Articles
How To Change Startup Programs on Windows 10? [Updated 2024]
How to Fix No Root File System Is Defined [Efficient & Easy Solutions]
Disk Space Usage Bar Missing - How to Recover It
Windows 11 24H2 Enables BitLocker by Default - How to Disable