HP Pen Drive Repair Software Free Download |100% Safe

How do you fix an HP pen drive with HP pen drive repair software? This post helps you download the best HP pen drive repair software.

HP Pen Drive is a portable storage device that allows you to store a lot of data in it. Their capacity ranges from 10 GB to hundreds of GB. But sometimes, you may find the HP Pendrive is corrupted or has the following symptoms:

• Write protection or unreadable
• RAW file system error
• HP USB is not recognized
• HP Pen Drive needs to be formatted
• HP Pen Drive not booting

The following causes may lead to these HP Pen Drive errors:

1. ✨Virus
2. 🎞️Outdate disk driver
3. 🗝️Bad sectors on HP USB
4. 🛞Damaged MBR
5. 🔔Write protection

Don't worry; EaseUS Software provides you with a professional HP Pen Drive repair tool to remove all of these errors. 

Best HP Pen Drive Repair Software Free Download

Through a thorough scan and check on the storage device, the EaseUS Partition Master Professional can quickly locate the error and repair the HP Pen Drive. It works smoothly on Windows 11/10/8/7/XP/Vista. Its clear interface makes it easy to use.

Let's see how this tool helps with HP Pen Drive repair:

• ✔️Scan and locate bad sectors
• ✔️Fix file system errors and corruption
• ✔️Fix damaged MBR and fix HP Pen Drive not booting error
• ✔️Format HP Pen Drive
• ✔️Remove write protection
• ✔️Recover Data from the HP Pen Drive
• ✔️Not only supports HP Pen Drive but also all other brands

Now, download this HP Pen Drive repair program and follow the guide below to learn how to use this repair tool for HP Pen Drive. 

How to Use the HP Pen Drive Repair Software

EaseUS Partition Master is a professional USB/SD card repair tool. Follow this part to learn how to use it.

Guide 1. Fix Bad Sectors

Bad sectors are one of the main errors on an HP Pen Drive. EaseUS Partition Master can run a disk surface test on it and mark all the bad sectors out.

Here is how to check the bad sectors on the HP Pen Drive:

Step 1. Open EaseUS Partition Master and launch it. Right-click the HP Pen Drive, and then click "Surface Test".

Step 2. The operation will be performed immediately, and all bad sectors will be marked red.

You can use the following buttons to share this HP Pen Drive repair tool.

Guide 2. Fix File System Error

It is dangerous to use an HP Pen Drive when it is corrupted. EaseUS Partition Master can fix file system corruption without requiring any command lines. It is an easy job to fix a corrupted HP Pen Drive.

This is how:

Step 1. Open EaseUS Partition Master on your computer. Then, locate the disk, right-click the partition you want to check, and choose "Advanced" > "Check File System".

Step 2. In the Check File System window, keep the "Try to fix errors if found" option selected and click "Start".

Step 3. The software will begin checking your partition file system on your disk. When it completes, click "Finish".

Guide 3. Rebuild MBR on HP Pen Drive

Sometimes, you can't boot your PC from the HP Pen Drive. That's because the MBR is damaged. EaseUS Partition Master can help rebuild MBR and boot the PC from the USB again.

Step 1. Create a WinPE bootable disk

• Launch EaseUS Partition Master, and click "Bootable Media" on the toolbar. Select "Create bootable media".
• Click "Next" to finish the process.

Step 2. Boot EaseUS Partition Master Bootable USB

• Connect the bootable USB or CD/DVD to your PC. 
• Press F2 or Del when you restart the computer to enter the BIOS screen. Set and boot your computer from "Removable Devices" or "CD-ROM Drive". And then EaseUS Partition Master will run automatically.

Step 3. Rebuild MBR

• Click "Toolkit" and choose "Rebuild MBR".

• Select the disk and the type of MBR. Then, click "Rebuild".

• After that, you can see "MBR has been successfully rebuilt on Disk X".

Guide 4. Recover Data From HP Pen Drive

EaseUS Partition Master comes with a "partition recovery" feature and allows you to recover data from an HP Pen Drive:

Step 1. Open EaseUS Partition Master and click "Partition Recovery". Select the HP USB with your lost partition and click "New Scan."

Step 2. Wait patiently to let the software execute the "Quick Scan" or "Full Scan" operation. It will mark your deleted partition as "lost" in the Status section. Select the lost partition, and click "Recover".

You can also double-click on the partition you're looking for to preview its content and click "OK" to confirm.

Step 3. Wait patiently and click "Done" when the partition recovery process completes.

Guide 5. Format the HP Pen Drive

USB drives can get stuck in write protection issues due to viruses or file system errors, or you find the file system is RAW. You need to format the drive to fix these errors:

Step 1. Launch EaseUS Partition Master, right-click on the RAW partition on the HP USB that you need to format, and choose the "Format" option.

Step 2. Assign a new partition label for HP Pen Drive, set the file system to NTFS/FAT32 (based on your needs), and cluster size to the selected partition, then click "OK."

Step 3. In the Warning window, click "Yes" to continue. Click Yes and allow this program to format the target RAW partition to the selected file system format on your drive. Then, execute the task and wait patiently.

Repair HP Pen Drive Using Other USB Repair Tools

Besides EaseUS Partition Master, you can also try CHKDSK commands or update the disk driver to fix a USB drive. Check this part for more details.

Option 1. Use CHKDSK Commands

Some advanced users would like to use command lines to check and repair a USB drive. Follow the steps with caution to prevent any data loss:

Step 1. Press the Windows icon and R to launch a Run dialogue. Type cmd in the Run box; then press Ctrl + Shift + Enter to run CMD as administrator.

Step 2. In the Command Prompt window, type "chkdsk G: /f /r /x

Note:

🧩Replace G with the correct USB drive letter.

🧩/f – This command tries to check and fix errors on the flash drive.

🧩/r – This command attempts to search bad sectors and recover information.

🧩/x – This command forces the HP USB to be dismounted.

Option 2. Update Driver

The last option you can try to remove the error from the HP USB Drive is to update the driver. If your USB can't be recognized, follow these steps:

Step 1. Right-click the Window icon and select "Device Manager."

Step 2. Locate the "Unknown Device." Right click it and select "Properties."

Step 3. Under the Driver section, click "Update driver" and follow the onscreen instructions to finish this update.

Option 3. Use Registry Editor

The HP USB drive will be write-protected if the Windows Registry Key is wrong. In this case, you can follow the steps to remove write protection from the USB Pen Drive:

Step 1. Press Windows + R to open the Run dialog. Type regedit and press Enter. 

Step 2. In the Registry Editor, navigate to the following path: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

Step 3. Look for a key named StorageDevicePolicies. If it doesn't exist, you will need to create it:

• Right-click on the Control folder.
• Select New > Key and name it StorageDevicePolicies.

Step 4. Right-click on the StorageDevicePolicies key and select New > DWORD (32-bit) Value. Then, name this new value WriteProtect.

Step 5. Double-click on the WriteProtect entry you just created. Set its value data to 0 (zero) to disable write protection. Click OK to save your changes.

Step 6. Close the Registry Editor and restart your computer to apply the changes.

Conclusion

This post covers a safe and reliable HP Pen Drive repair tool - EaseUS Partition Master. It's an all-in-one disk repair tool, allowing users to file most software-based errors, such as bad sectors, file system errors, data loss, and not booting errors.

It not only supports HP USB but also supports all other brands, like SanDisk, HP, Toshiba, and Sony. If you like this disk repair tool, share this article and let more users know about this tool.

FAQs About Free Download HP Pen Drive Repair Tool

Check the following content to learn more details about this HP Pen Drive repair tool.

1. What is the best HP USB repair tool?

You can use the HP USB disk storage format tool or the CHKDSK utility to check and repair bad sectors. EaseUS Partition Master is a better choice for running a thorough scan and check.

2. Can a pendrive be repaired?

If the flash drive won't work because of physical damage, you should take it to a tech department. If there is a software-based error, you can use a USB repair tool to fix it.

3. How do you run CHKDSK to repair an HP Pen Drive?

Follow these steps to run CHKDSK commands on an HP Pen Drive:

1. Step 1. Press WIN + R to open a Run window, type cmd, and launch Command Prompt.
2. Step 2. Type the following commands: chkdsk [drive letter]: /f /r /x
3. Step 3. Press Enter and wait patiently.