How to Share Files from PC to PC Using IP Address | IP File Transfer

How to connect and transfer files between two computers using their IP addresses without using a serial cable or a special parallel transfer cable? Let EaseUS Todo PCTrans help. As long as the two computers, or perhaps multiple computers, are connected to the same LAN, you can easily put the IP address for a direct connection for data share or transfer.

Do you know that you can send and receive files via FTP with your IP address? On this page, we discovered two reliable ways to help you share files from PC to PC using IP address. Let's go forward and check the details below:

Preparations for IP File Transferring

How to Transfer File via an IP Address - 2 Reliable Ways 

Highlight:

• To transfer files, apps, and even settings to a new PC via IP address, take Method 1 for help.
• To share a single file or a few documents, you can apply Method 2 with the shown solution to execute the task.

Preparation before Transferring Files

Check the list here and ensure everything's ready before you move to the next part and transfer files via IP address:

1. 1. Two computers
2. 2. Network connection for both 2 PCs
3. 3. Locate and confirm what files and data you'd like to transfer
4. 4. Select a reliable IP address file transfer method: 1️⃣Use PC File Transfer Software; 2️⃣ Use IP Address FTP Way

1. 5. Find the IP addresses of two PCs:

• For WiFi Connection: Right-click Windows icon and select "Settings" > Click "Network & internet" > Click "WiFi" and select your WiFi network > Go to Properties and find IP address next to IPv4 address.
• For Ethernet connection: Go to Settings > Click "Network & internet" > Click "Ethernet" > Check your IPv4 address under the Properties section.  

For beginners, it's wise of you to get a download of EaseUS Todo PCTrans Free to share files from PC to PC via IP address efficiently:

How to Share Files from PC to PC Using IP Address [2 Free Ways]

To efficiently transfer files between two computers by using IP address, you have two options here:  

1. #1. Use PC to PC File Transfer Software 👍🏻
2. #2. Use FTP to Share Files

Beginners are highly recommended to take Method 1 for help as it's easier, more efficient, and more comprehensive for files, applications, and PC settings transferring between computers.

Method 1. Transfer Files from PC to PC via IP Address by Using PC File Transfer Software

EaseUS Todo PCTrans is a reliable PC file transfer software, and it enables all levels of users to accomplish integrated data migration between computers via IP address with the network connection. Here is how to do so:

Step 1. Set Up the Old PC

• First, install and launch EaseUS Todo PCTrans and select Data Transfer on the left panel of the main interface.

• Select "Transfer Directly" and click "Next" to continue. 

Step 2. Set Up the New PC

• Download and launch EaseUS Todo PCTrans on the new computer; select "This is New PC" and click "Next".

• Select "Transfer directly" and click "Next" to continue. 
• Select "Network" and click Next to continue. This will automatically scan the old PC. (Make sure the two PCs are connected to the same LAN.)

• Select the target PC and click Connect. Then, it will take some time to scan and analyze the data in old PC.

Step 3. Select the Files to Transfer

• Finally, on the new PC, select the Files tab, select the files you need to transfer. Then, click "Transfer" to start.

BONUS TIP: follow the link below if you are also interested in how to share files between computers on different networks:

Method 2. Manually Transfer Files to A New Computer Using IP Address

To do so, you'll need to do some conformation at first. We suggest that you to be very careful in following the steps here.

Step 1. Connect both two computers via a ethernet cable.

Step 2. Open the Control Panel, and click "Network and Sharing Center", click "Ethenet > Properties > IPv4 > "Properties".

Exchange and enter the IP address and Subnet mask code of PC1 to PC2 IPv4 properties, PC2's code to the PC1 IPv4 properties.

Step 3. Re-enter Network and Sharing Center, open "Change advanced sharing settings" and tick the following 3 options and click "Shave changes":

• Turn on network discovery.
• Turn on file and printer sharing.
• Turn on sharing so anyone with network access can read and write files in the Public folders.

Then, enable "turn off password-protected sharing".

Step 4. Locate and right-click the files you want to transfer, select "Share with > Specific people...".

Step 5. Select "Everyone" at the Add section and click "Share".

Step 6. Open File Explorer, and open the Network pane, find the source PC1 and double-click on it.

Step 7. Select and copy files to the destination PC2.

If you prefer an even more detailed guide, go to this link for help:

Summary of File Transfer Using IP Address

Every system that is connected to a router or switch gets an IP address assigned to it from the administrator (Static IP addresses) or by default (with DHCP protocol). This IP address is used to identify a system on the network. So with this IP address, you can request information or send information to another device.

To do the file transfer using an IP address, usually, there are two ways.

• By a mapped drive - As you know, this type of IP connection creates a mapped drive to the shared computer where you can edit, delete and add files on the Network.
• By a network cord/cable - Also, you can connect the two computers using a proper cable.

Either way enables you to transfer information from one computer to another. However, it's too time-consuming, most importantly, too complicated for average users to go through with the configuration and settings.

So alternatively, let's find an easier yet more intelligent, and comprehensive way for file transfer between two operating systems, computers, a computer, and a laptop, or just laptops of more than two sets.

Here, we recommend free and fast file transfer software to ease the stress for beginners. Advanced users can also take method 2 as shown above for help.