When your SD card is not working in the camera, stop using both devices. This page analyzes the causes and offers a complete guide to show you how to fix this error, making the SD card working in your camera again. And don't worry about losing your photos or videos. EaseUS file recovery software is here to help.
What will you do if the SD card suddenly becomes inaccessible on your camera? Or the SD card stops working without a sign in the camera? Why does card error on camera occur, and how to fix it?
The camera not reading SD card error arises from a corrupt file system, physical damage, or virus attack. You can resolve the problem by checking SD card compatibility, reinserting, unlocking, or formatting the SD card, and cleaning the card slot. Also, you can fix the SD card not working in the camera error without data loss using professional SD card recovery software.
Is your SD card not working on camera? Here is why and how. Let's get started!
If you have the same doubts, check the possible reasons here, and it could be one of them that caused your camera SD card not to work:
So, how do you define the main cause of your SD card not working error? Test the SD card and locate the exact error.
Here are the steps and solutions
| Steps to Check SD Card | Solutions to Fix Not Working SD Card |
|---|---|
| 1. Take the SD card out of the camera to see if it's broken or damaged. | Yes: Replace It with A New SD Card |
| 2. Check if the SD card lock is enabled or on the Lockside. | Yes: Unlock It |
| 3. Check if the SD card is working in a new camera or PC. | Yes: Repair the Camera SD Card Slot |
| 4. Camera Error Message: Card Not Formatted. Format card with this camera. | Yes: 1. Reinsert SD card 2. Access Files & Format card with camera or PC |
| 5. Card cannot be accessed. Reinsert/change the card, or format card with the camera. |
Now, follow the guide here one by one and you'll learn to make your SD card working again in Camera.
Error: SD card is physically damaged or partially broken.
Step 1. Purchase a new SD card with the same capacity or bigger space than the old one.
Step 2. Replace the broken card and format the new SD card to a proper format.
Suggested SD card formats:
Error: SD Card is locked, the lock of SD card is on the ON size.
Step 1. Unplug or take out the SD card from the Camera properly.
Step 2. Find the SD card lock and switch it to the Off-side.
Step 3. After this, reinsert the SD card into your camera and see if it's working.
Error: You connect the SD card to the computer, it's working fine. The problem exists in the Camera SD card slot.
Step 1. Open the SD card slot case in the camera.
Step 2. Check if there is dust covering in the slot.
If yes, clean all with a cutton swab. Use some alcohol pad if necessary and dry it later.
Step 3. When the slot gets cleaned, re-insert the SD card back to your camera and see if works.
If not, you'll need to take it for repair at a local repair center.
Error: Camera error message - Card cannot be accessed. Reinsert/change the card, or format card with camera.
Step 1. Take the SD card out of the camera.
Step 2. Shut down the camera and wait for 2-3 minutes.
Step 3. Re-insert the SD card into the camera and reboot it.
Check if the SD card is working in the camera now. If not, move to the next part and fix this error thoroughly.
Error: SD Card Not Formatted. Format card with this camera.
1st. Access and Restore Files from SD Card
As long as your files in the Camera SD card are important, we suggest you follow the guide here to recover SD card photos and videos to another secure location in advance.
Here is how to do it:
Download EaseUS Data Recovery Wizard > Connect SD card to PC > Apply its photo recovery feature to scan and restore all the SD files.
Step-by-step guide for recovering deleted files from the SD card:
Step 1. Select the SD card to scan
Step 2. Check for scan results
Step 3. Recover SD card data
Video Tutorial of Camera SD Card Recovery:
Once you save the files out of the SD card, you are now good to follow the tips below to fix the SD card not working error in your camera.
2nd. Format SD Card to a Supported Format for Camera
You can either choose to format the SD card in Camera or in PC. Here is the guide:
Format on Camera:
1. Insert an SD card into the camera and turn on your camera.
2. Go to the Settings, find the Format or Format SD card option.
3. Press the confirm button to format the card on your camera.
Format on PC:
1. Insert SD card to PC, open File Explorer. Right-click SD card and select "Format"
2. Set "FAT32 or exFAT" as the file system, tick "Quick Format". Click "OK".
On this page, we explained the causes of the SD card not working in camera error and offered 5 fixes for this issue. Which is the most effective method?
Editor's Recommendation: If it's not a physical error, take your time to try Fix 2 to Fix 4 one by one.
As for the most effective tip, it's formatting the SD card.
Of course, remember to access and restore all files from the card first with EaseUS Data Recovery Wizard.
Last but not the least, don't forget to back up important videos and photos in your camera to a local device timely, as you don't know when will the next error or problem occur.
Related Articles
How Do I Recover Document in SharePoint | Click Here
How to Fix: SD Card Command Volume Partition Disk Failed with Null
Free | How to Recover Files from Formatted USB/Pen Drive
How to Fix 'Class Not Registered' Error | 7 Solutions