Fix An External Hard Drive That's Not Working/Responding/Showing Up

This article provides you with 100% working methods to fix "external hard drive not working/responding error" without losing any data. If your external hard drive is not working, fails to respond or becomes undetectable, download EaseUS disk data recovery software here with 100% working methods to repair your not working external hard drive in Windows 10/8/7 PC and restore data now.

External hard drives are often used to back up important data from our Windows PCs. If the drive should suddenly stop working, it could prove disastrous. But don't worry, we'll explain how to get it working again and save those precious files.

Applies to: Fix external hard drive, USB drive, SD card, internal HDD/SSD, etc., not working or responding error on Windows PC.

Quick Guide - Fix External Hard Drive Not Working/Responding Error in 3 Parts:

The following solutions for fixing problems with external hard drives will work with any brand, including WD Elements, Seagate, SanDisk, Toshiba and others.

Causes of External Hard Drive Not Working/Responding

If your external hard drive suddenly stops working or cannot be recognized by your PC, don’t panic. There are many reasons why the drive has become problematic, such as these:

You don't have to buy a new external hard drive and give up all the precious data. First, check the causes that make your external hard drive not working:

• Problematic connection
• RAW, invalid or unsupported file system 
• Drive letter conflict or no drive letter
• No partition
• Not initialized
• Outdated disk driver
• USB Root Hub is outdated
• Disk is physically damaged
• ...

No matter the cause, if you follow the tips laid out below you should hopefully get the drive going once more or at least recover your data.

You May Also Be Interested In:

If you are having a similar issue with your PC's hard drive, you can try the fixes below. 

Part 1. Make Non-Working External Hard Drive Detectable

Applies to: Fix an external hard drive not detected due to a connection problem.

If you encounter problems with an external drive suddenly not working or becoming undetectable to your PC, the first thing to check is the physical connection.

#1. Check and Change External Hard Drive Connection Cable

Start off by checking the connecting cable between your drive and PC:

• If the USB connector has become loose in the port, just push it firmly back into place and see if that corrects the problem.
• If the cable is broken or damaged, replace it with a new one and try again. In fact, even if you can’t see any obvious damage, it's worth swapping the cable in case there is a problem inside.

#2. Change a USB Port or Connect to a New Computer

If the cable appears fine, then it could be the USB port on your PC that's faulty.

Try plugging the drive into another one to see if that helps. If possible, you can also try connecting the drive to a different computer to see whether the problem is with the drive or PC.

#3. Check Power Management for USB Hub

If none of the above methods get the drive working again, you should check to see if the power management settings in Windows could be causing the issue. Here's what to do:

Step 1. In Run (Windows + R), type devmgmt.msc and hit Enter.

Step 2. Open Device Manager > expand "Universal Serial Bus controllers".

Step 3. Right-click USB Root Hub > Properties > Power Management > uncheck "Allow the computer to turn off this device to save power".

After following the tips above, hopefully, your computer should be able to detect and recognize your external hard drive. If that’s the case, you can try to open the drive and access the data.

If that’s not possible, don't worry. Move to Part 2 and we'll show you how to use the EaseUS data recovery software to restore all your precious data.

Part 2. Recover Data Before Fixing a Non-Working Drive

After making the external hard drive detectable, we suggest that you recover any data stored on it immediately. This will not only ensure you have a copy of the files but also avoid the possibility of losing anything stored on the disk while trying the fix the problem. Here’s how to salvage your files.

3 Steps to Recover Data from External Hard Drive

To recover data from a problematic drive you’ll require dedicated software. EaseUS Data Recovery Wizard is the perfect tool for the job as it’s fast, reliable, and easy to use.

See how to restore data from the external hard drive on your own:

Step 1. Use a correct USB cable to connect your external hard drive to your computer. Run EaseUS Data Recovery Wizard and you will see your external disk under External drives. This software supports all the popular external disk brands, including WD, Seagate, Toshiba, LaCie, SanDisk, Samsung, etc. 

Select the external hard drive and then click the "Search for Lost Data" button. 

Step 2. As soon as the scan process starts, the software will find more and more lost and deleted data and display the data in the scan results. The recovered data will be nicely organized. You can quickly find the target files/folders by file type or search in the search box with exact file name. 

Step 3. You can preview the files found by EaseUS Data Recovery Wizard's scanning algorithms. Then, select files and click "Recover". To avoid data overwriting, we recommend that you save the recovered data to a different drive than the original Seagate drive.

💡Tip: You can restore data on the local disks, external hard drives, and also the cloud storage.

Don't save the recovered data on your external hard drive before fixing and making it work normally again.

Part 3. How to Fix "External Hard Drive Is Not Working/Responding" Error

Now we'll look at how to repair the non-working or undetectable drive

To get a better idea of what needs fixing, open Disk Management in Windows and check the state of the drive.

1. #1. Check and Fix Disk Errors on External Hard Drive - Disk Contains Corrupted File System Error
2. #2. Format External Hard Drive to NTFS - Disk Shows RAW or Unsupported File System
3. #3. Create A New Partition in External Hard Drive - Disk Displays as Unallocated
4. #4. Assign a New Drive Letter to External Disk - Disk Shows as "New Volume" with No Drive Letter
5. #5. Initialize External Disk and Create a New Volume - Disk Is Unknown, Not Initialized
6. #6. Update Disk Driver
7. #7. Update Universal Bus Controllers 
8. #8. Run Antivirus Software
9. #9. Turn to External Hard Drive Manufacturer or Repair Center for Help

Methods 1-7 can fix most problems with non-working drives, but should that not be the case you can turn to methods 8 and 9 for help. Let's go through each method step by step.

Method 1. Check and Fix Disk Errors on External Hard Drive

Applies to: Fix external hard drive that's not working due to unknown disk error or corrupted file system.

Mostly, when an internal or external hard drive contains an unknown error or a corrupted file system, the Windows PC will be unable to detect or open the drive.

Here are two options you can try to fix these problems.

Option 1. Run Partition Manager Freeware to Fix External Hard Drive Not Responding Error

Download and install EaseUS Partition Master Free on your PC.

Step 1. Right-click the target partition that has a problem.

Step 2. Choose "Advanced" > "Check File System".

Step 3. Confirm if you want to hide the partition or not.

Step 4. In the Check File System window, check the "Try to fix errors if found" option.

Step 5. Click "Start" to check errors on your partition.

Option 2. Run CMD to Manually Fix External Hard Drive Errors

Step 1. Type cmd in the Search box, right-click to open Command Prompt.

Step 2. Right-click "Command Prompt" and choose "Run as administrator".

Step 3. Type chkdsk /f /r /x g: and hit Enter to begin the checking process.

Note: Replace g with the drive letter of your external hard drive.

Step 4. When it's finished, type: exit and hit Enter to finish the process.

Your disk should now be detectable to Windows. If it still doesn’t work, there’s another option you can try.

Option 3. Run CMD Alternative to Fix External Disk File System Error

The Command line is a powerful way to fix problems on Windows, but it can also cause severe problems if you enter code incorrectly. Therefore, we strongly recommend you try EaseUS Clean Genius instead.

It's a practical and safe way to repair file system or disk error, as we’ll demonstrate below:

Download EaseUS CleanGenius and install it on your computer. Let's start checking and refixing file system error on your device now.

Step 1. Click "File Showing" to enter the next step.

Step 2. Choose the target device and tick the box of "Check and fix file system error". Click "Execute" to start fixing the problematic device.

Step 3. When the fixing process completes, click "here" to open and use your device. 

Method 2. Formatting an External Hard Drive to NTFS to Repair the Fault

Applies to: Fix external hard drive not working/detected/responding error due to RAW or unsupported file system.

If your external hard drive shows up as RAW or with an Unsupported File System in the Disk Management app in Windows, the best solution is to reformat the drive

Here's how to reformat a drive that’s showing as RAW or with an Unsupported File System:

Step 1. In Run (Windows + R), type diskmgmt.msc and hit Enter.

Step 2. Go to Disk Management, right-click the external hard drive, and select "Format".

Step 3. Choose a file system like NTFS or exFAT and tick "Quick format". Click "OK" to start the formatting.

When this is done, your external drive should be safe to use once more

Method 3. Create A New Partition in External Hard Drive

Applies to: Fix disk displays as unallocated in Disk Management that makes external hard drive not working.

Mostly, when your external hard disk shows as unallocated, it means that there is no partition in the disk. As a result, the computer cannot recognize it. To fix this issue, you need to first recover data from the disk first (as shown in Part 2).

Then, you can follow the steps below to create a new partition, making the external hard drive working again:

Step 1. Connect the unallocated external hard drive to your PC and open Disk Management.

Step 2. Right-click on the unallocated space of the external hard drive, select "New Simple Volume".

Step 3. Set partition size, drive letter and file system (NTFS), etc.

Step 4. Click "Finish" to complete the process.

Method 4. Assign a New Drive Letter to External Disk 

Applies to: Fix disk shows as "New Volume" with no drive letter that causes external hard drive not responding.

Step 1. Go to Disk Management and right-click on your external hard drive.

Step 2. Go and select a new drive letter by clicking "Change", and click "OK" to confirm.

The non-responding drive should now be readable by Windows.

Method 5. Initialize External Disk and Create a New Volume

Applies to: Fix "Disk Is Unknown, Not Initialized" that causes the external hard disk to not work nor be detected

Step 1. Right-click "My Computer" > "Manage" to run Disk Management.

Step 2. Here, right-click the Unknow external hard drive and click "Initialize Disk".

Step 3. Select the disk(s) to initialize and choose MBR or GPT partition style, then, click "OK" to confirm.

Now the drive should be recognized as ‘unallocated’, so if you have data you need to recover, go back to Part 1 and use the EaseUS data recovery software to retrieve your files.

Step 4. Finally, right-click on the unallocated space on your external hard drive and create a new volume on it.

Method 6. Update Disk Driver

Applies to: Get non-responding external hard drive to show up and work by updating disk drivers.

Step 1. Right-click "This PC" and choose "Manage".

Step 2. Click "Device Manager" then expand "Disk drives".

Step 3. Find and right-click the problematic external drive and select "Update driver".

Step 4. Click "automatically search for driver software online".

Method 7. Uninstall Universal Bus Controllers

Applies to: Fix external hard drive not working issue by updating Universal Serial Bus controllers driver.

Step 1. Open "Device Manager", find and expand Universal Serial Bus controllers

Step 2. Right-click on the USB controllers of your external drive and select "Uninstall device".

Step 3. Repeat to uninstall each USB controller one by one. Then restart the computer.

While rebooting the PC, Microsoft will automatically reinstall the USB controllers software for your not working external hard drive.

Method 8. Run Antivirus Software

Applies to: Fix virus or malware that causes your external hard drive not working.

Sometimes, the problem causing your drive to malfunction can be a virus or malware on your system. If you’ve tried the methods outlined above without success, another option is antivirus software. Here’s how to use it:

Step 1. Install and run antivirus software on your computer.

Step 2. Scan and unlock the external hard drive.

Step 3. Wait for the cleaning process to complete, then, restart the PC.

After this, reconnect your external hard drive to the computer and check if you can use it again.

Method 9. Turn to External Hard Drive Manufacturer or Repair Center for Help

If all else fails, the last option is to contact either the manufacturer of the hard drive or a local disk repair center for help. If the physical disk is damaged in some way or the firmware is outdated, then they may be able to help.

If you’re only interested in saving the data on the drive, then either may be able to assist you, plus you can contact EaseUS Data Recovery service to talk to one of our technicians.

To Sum Up

On this page, we explained the causes of external hard drives not working, not responding, and not detecting errors. To make things easy for you, we divided the whole process into 3 parts:

Part 1. Make external hard drive detectable; Part 2. Recover data from the external hard drive; Part 3. Fix not working external hard drive with respective solutions.

The methods offered in this article can also be applied to repair and fix SD cards, memory cards, USB drives, flash drives, or hard drive partitions displaying similar issues.

It's recommended that you regularly create extra backups of your files to another secure location, with cloud storage services being an excellent and affordable option. But, if disaster should befall your drive, always remember that EaseUS Data Recovery Wizard is on hand to help.

External Hard Drive Not Working/Responding FAQs

After learning how to repair the not responding external hard drive, you may have more questions about it. See if you can find your answers here:

1. Why did my external hard drive stop working?

External hard drives are particularly prone to failure due to frequent improper use, outdated drivers, bundling with incompatible software on different operating systems, frequent connection and disconnection to different devices, and, in the case of portable or USB hard drives, unsafe ejection.

2. How can I recover data from a corrupted external hard drive?

To restore files from a corrupted external hard disk, follow these steps:

1. Connect your hard drive to your computer.
2. Start the EaseUS Data Recovery Wizard.
3. Scan the external hard disk after selecting it.
4. Select the files you want to recover and click Recover.

3. How do I fix a corrupted external hard drive?

You can use Windows repair tools if your external hard drive becomes corrupted.

1. Open This PC, right-click the bad-sector drive, and select Properties.
2. Navigate to the Tools menu.
3. Click Check to examine and repair the faulty sectors on your external hard disk.

4. How much does it cost to fix a corrupted hard drive?

Based on these criteria, basic hard disk data recovery fees range between $100 and $700. This cost is normally determined by the severity of the damage and the time required to reach the data extraction point. If the hard drive fails mechanically, data recovery costs may escalate.