White Light of Death PS4: Quick Solutions Without Data Loss

If you are experiencing the White Light of Death issue on your PS4, learn quick solutions to fix it without any data loss. Follow these steps to get your console back up and running.

The WLOD (White Light of Death) is a problem with the PS4 console. The console turns on and shows a white light, meaning it should be working fine. However, it turns out there's no sound or visual on the screen, which can be frustrating. In this article, we'll look at the solutions to this issue:

PS4 White Light of Death, Why

The "white light of death" on a PS4 can stem from various issues involving both hardware and software. Some potential causes include:

• HDMI connection: A faulty HDMI cable can trigger the white light of death error on the PS4.
• Overheating: Poor ventilation can cause the PS4 to get too hot, which may make the system shut down or stop working, including causing the white light of death issue.
• Power supply issues: A damaged power supply or cable might not give the console enough power, leading to this error.
• Hardware malfunction: Problems with internal parts like the hard drive or motherboard can also cause the white light of death.

Note that the "white light of death" on a PS4 can have multiple causes. Also, the exact reason may not always be immediately clear. In some cases, professional repair or console replacement may be necessary.

How to Fix White Light of Death PS4 [6 Solutions]

After recovering your lost PS4 game files using professional and trusted software (jump here to view full guide 👉How to recover lost PS4 data with EaseUS software). Here are some effective methods to resolve the PS4 white light of death issue:

Method 1. Check HDMI Connection

Start by checking the HDMI connection between your PS4 and TV since a loose HDMI cable is often the leading cause of the PS4 white light of death. Follow these steps:

Step 1. Disconnect the HDMI cable from both the console and the TV.

Step 2. Check the ports and cables to ensure they are clean and not damaged.

Step 3. Examine the ports on the TV and console to make sure they are clean and in good condition.

Step 4. Lastly, reconnect the HDMI cable to see if the issue is resolved.

Method 2. Check Hardware Issues

Hardware damage is a common cause of the PS4 white light of death (WLOD). If your PS4 has been exposed to physical impact, an internal component may have been damaged. To check for hardware issues:

1. Ensure your PS4 is correctly plugged into an outlet and all cables are securely connected.
2. Power on the console and listen for any unusual noises.

If you hear grinding sounds or notice sparks inside the PS4, unplug it right away and contact Sony for support.

Method 3. Update/Reinstall the Controller Drivers

Surprisingly, outdated controller drivers can sometimes cause the PS4 white light of death. Updating to the latest drivers may resolve the issue. To do this:

Step 1. Press "Win + R" to open your Run dialog box.

Step 2. Type devmgmt.msc, and press "Enter".

Step 3. Right-click on your device and choose "Uninstall." Ensure you check the box for "Delete the driver software for this device" and later tap "Uninstall."

Step 4. Reconnect the PS4 to your PC.

Step 5. After that, visit the manufacturer's website to download the latest compatible driver.

Besides, EaseUS software can help fix corrupt data errors on a PS4; download and install this powerful recovery tool to protect your game data!

Method 4. Reset PS4 Controller and Console

If updating your controller drivers didn't resolve the issue, try resetting your PS4. While doing this, remember that a full reset could cause data loss.

Step 1. Long-press the power button until the console powers off.

Step 2. After the PS4 goes off, disconnect all cables.

Step 3. Next, let the console rest for 2-3 minutes.

Step 4. Reconnect all the cables and power the console back on.

If you think this post helps, share it on your SNS to help more people learn effective methods on how to fix the white light of death on a PS4.

Method 5. Enter Safe Mode

If the previous methods haven't worked, try entering Safe Mode on your PS4.

Step 1. Start by turning off the PS4.

Step 2. Press and hold the Power button until you hear a second beep.

Step 3. Connect your PS4 controller with a USB cable, then long-press the PS button.

Step 4. Your PS4 will now enter Safe Mode. Here, you can perform a factory reset by reinitializing the console.

Method 6. Update Your PS4 Firmware

If the problem persists, it might be due to a software issue. Updating your firmware to the latest version could help.

Step 1. Go to "Settings"> "System Software Update" and follow the on-screen instructions.

Step 2. After the update, restart your PS4.

Bonus Tip: Recover Data from PS4

If the steps above don't fix the problem, it's great to save your data from the PS4 before sending it for repair. This way, your important files, game progress, and other data stay safe. One good way to recover data is by using EaseUS Data Recovery Wizard.

This tool helps you get back lost data from different storage devices, including your PS4 hard drive. With its easy-to-use design and strong recovery features, it makes sure your important data isn't lost during troubleshooting or repair. Here are the steps to recover your data before starting repairs:

Step 1. Launch EaseUS file recovery software on your Windows computer. Choose the exact location where you lost the files and click the "Search for Lost Data" button.

Step 2. The software will immediately start scanning the drive, and the deleted files will be displayed soon. If you find the files you need during the scan, you can stop the scan. In order to find the target file quickly, you can use the file format filter or search in the search box.

Step 3. Select files, such as Word, Excel, PDF, photos, videos, or emails and click the "Recover" button. You can browse for a different location or Cloud drive to keep the recovered files.

Conclusion

In summary, we have looked at different ways to fix the white light of death PS4 error. We've explored them running from checking HDMI connections to updating firmware. For an efficient data recovery solution, we recommend downloading EaseUS Data Recovery Wizard. It's a powerful tool that can help you safeguard your important files before sending your PS4 for any necessary repairs.

White Light of Death PS4 FAQs

Are you still looking for ways to fix the "white light of death PS4" issue? Here are quick ways to fix this issue. Check them out!

How do I fix the white light of death on my PS4?

Here's what to do to fix the white light of death on my PS4:

• Check HDMI connection
• Check hardware issues
• Update/reinstall the controller drivers
• Reset PS4 controller and console
• Enter safe mode
• Update your PS4 firmware
• Recover data using EaseUS Data Recovery Wizard

What does flashing white light on PS4 mean?

A blinking white light or a blue light that doesn't turn solid white means your console is frozen and needs troubleshooting. To fix this:

• Unplug the console.
• Wait for 60 seconds.
• Plug it back in and turn it on again.