How to Test NVMe I/O Speed on Windows and Mac? [2024 Checklist]

Have you recently installed an NVMe SSD on your system and want to know how fast it is? By running a disk speed test, you can find how well the newly installed NVMe SSD performs. Learn how to test NVMe I/O speed accurately in this article.

NVMe SSDs are among the fastest storage drives in the computing world. If you have recently installed an NVMe SSD on your system, running a disk speed test to test NVMe I/O speed can help determine improved computer performance. The I/O speed will allow you to determine how fast your system can transfer files across different storage devices.

Don't worry if you don't know how to run an NVMe speed test. Stick with the article to learn how to easily and accurately test NVMe I/O speed on Windows and Mac.

What Is NVMe I/O Speed

In the world of computers, the I/O speed refers to a computer's input and output speed. It is the representation of how much data a computer can transfer between its processor and its input/out devices in a specific time. A computer's input/output devices include hard drives, USBs, and other similar devices. The I/O speed is usually measured in input/output operations per second or IOPS.

For I/O speed, the "I" means input, representing the rate at which data can be transferred to a computer. In comparison, the "O" means output and refers to the data transfer rate from a computer to an output device. To make it simpler, for NVMe, the I/O speed means the number of input/output operations it can perform in a second. Higher the I/O speed, the better the NVMe performance.

How Do I Test My NVMe I/O Speed On My Own?

Testing the I/O speed of your NVMe is not difficult and can be done through reliable disk speed software or the operating system's inbuilt tools. Professional speed test software are recommended as they are easier to use and provides accurate results. Below are three methods to test NVMe speed for Windows and Mac:

1. #1. EaseUS Partition Master
2. #2. CMD
3. #3. Blackmagic Disk Speed Test (for Mac)

The first two methods are for Windows users only, while the third is recommended for Mac users. Among these methods, using CMD will not require you to use a third-party app, but its command-line interface makes it unsuitable. Accidently running wrong commands can also harm your computer's operating system. That's why, for Windows, it is best to use EaseUS Partition Master to test NVMe I/O speed.

#1. Test NVMe I/O Speed with EaseUS Partition Master on Windows

EaseUS Partition Master is the best disk speed test software available for free to test NVMe I/O speed on Windows. This tool will provide accurate and detailed speed results to help determine your NVMe SSD's performance. It has a dedicated feature called “DiskMark,” which is the perfect tool to test the speed of storage drives like NVMe, M.2, SSD, HDD, USB, etc.

When using EaseUS Partition Master to speed test your NVMe drive, it will provide the results using read/write speed. I/O speed and delay speed metrics. What do these metrics represent? Read below to find out more:

• Read/Write Speed: The read/write speed of your NVMe drive will inform you about the time it takes to read or write a certain size of data in a given time. It is usually measured in MB/s or GB/s, and a higher read/write speed represents a faster drive.

• I/O Speed: As explained before, the I/O speed of your NVMe SSD represents how many input or output operations it can perform per second. The higher I/O speed is an indicator of high performing hard drive.

• Delay Speed: Your NVMe SSD's delay speed will indicate the time it takes to access the stored data. It is also known as latency rate and is measured in milliseconds or microseconds. A faster NVMe drive will have a lower delay speed.

Steps to Test NVMe I/O Speed Via EaseUS Partition Master

Due to its clean and intuitive interface, it is not hard to use this tool to test NVMe I/O speed. Use these steps to test NVMe I/O speed using EaseUS Partition Master:

Step 1. Launch EaseUS Partition Master. And click the download button to activate the "DiskMark" feature under the "Discovery" section.

Step 2. Click on the drop-down box to choose the target drive, test data, and block size.

Step 3. Once everything is configured, click "Start" to begin the disk test. Then, you can see the Sequential or Random read/write speed, I/O, and Delay data.

#2. Test NVMe I/O with CMD Command Line

The Command Prompt on Windows is also a great way to test NVMe I/O speed. However, using CMD can confuse non-regular users due to its command-line interface. To check the I/O speed of your NVMe SSD, you will need to use a WinSAT command. Follow the steps given below to test NVMe I/O speed with CMD on Windows:

Step 1: You will need to run the CMD as administrator on Windows to test NVMe I/O speed. For that, first, use the "Win + R" key to open the Run function. Here, type "cmd" and use the "Ctrl + Shift + Enter" key to launch CMD as administrator.

Step 2: Once the Command Prompt is open, run the following WinSAT command line:

“winsat disk -ran -write -drive Z” (Replace the “Z” with your NVMe drive name)

Wait for a while, and you will be able to seed the I/O speed of your NVMe SSD.

#3. Run and Test NVMe I/O Speed on Mac with Blackmagic Disk Speed Test

Want to know the best tool to test NVMe I/O speed for Mac? Blackmagic Disk Speed Test is an excellent lightweight and free tool available on Mac to test the speed of storage drives. This tool is completely safe and has a clean and simple interface. The steps required to test NVMe I/O speed via Blackmagic Disk Speed Test on Mac are given below:

Step 1: Use the Apple Mac App Store to install Blackmagic Disk Speed Test on your Mac and open it. If you want to run the speed test with the default stress value, hit the "Speed Test Start" button.

Step 2: To change the stress value, first tap the "Gear" icon to select a value and then click "Speed Test Start". After the test, the result can be saved using the gear icon and selecting the "Save Screenshot" option.

Final Verdict

Knowing how to test NVMe I/O speed ensures you know how much your system's performance has improved. If it isn't up to the mark, it can indicate a faulty NVMe SSD or other issues in your system. That's why EaseUS Partition Master is the best choice on Windows, as it will help resolve disk issues and provide accurate speed scores. For Mac, Blackmagic Disk Speed Test is the best choice.

FAQs About Testing NVMe I/O Speed

If you want to know more about how to test NVMe I/O speed, we have answered some FAQs about it below:

1. How do I run SSD read/write speed test online?

No, it is not possible to check the read/write speed of an SSD online. Given that SSDs are hardware components, you will need to download speed test software on your system. For Windows users, the best free SSD speed test software is EaseUS Partition Master, while for Mac users, it is Black Magic Disk Speed Test.

2. How do I test my NVMe performance?

To check how well your NVMe SSD is performing, you can run a disk speed test by using the following steps on Windows:

Step 1: Use the search bar on Windows to search Command Prompt and click “Run as administrator” to open the CMD with admin privileges.

Step 2: Now use the “winsat disk -ran -write -drive (name)” to check the performance of your NVMe.

3. How fast should my NVMe be?

The NVMe SSDs are among the fastest storage drives in the market. Their optimal speed depends upon the generation of PICe your NVMe SSD has. The most commonly used NVMe SSD PICe G3 should easily exceed the 3000 MB/s speed. An NVMe SSD PICe G4 has a speed of over 7500 MB/s.