How to Fix Error Code 2003F When Entering Recovery Mode on macOS 13/12/11

Many Mac users have recently encountered the error code 2003F when they start their Mac. If you are experiencing the same issue and are looking for straightforward solutions, this post may help you to fix the Mac error.

Can't reinstall macOS on Mac? And in Mac's Recovery Mode, it displays the error code - 2003F. Here are several ways to resolve Mac error code 2003F so you can finish reinstalling the macOS process.

Mac error code - 2003F doesn't appear in a dialog box like other standard Mac error codes. When you try to start your Mac in Internet Recovery mode, it seems like white lettering on a dark screen. It indicates a problem with the Internet while attempting to connect to the recovery server.

Explanation: What Is Mac Error Code 2003F

Many users state that when they attempt to reinstall macOS via Mac Internet Recovery Mode after formatting the drive, they encounter the Mac error code 2003F appearing on the screen.

Error code 2003F means Mac's internet connection is unreliable, as shown by the earth icon and the exclamation point. The system of downloading recovery utilities is prevented from Apple's servers over the Internet.

Numerous reasons might cause the Mac error code 2003F:

• Bad Internet connection
• Disk issues of the Mac
• Virus infection
• macOS update can't be installed on the disk

First - Aid: Recover Your Data When You See the Error Code

Even though Macs are evolved nowadays, accidents and errors can still occur. The startup error code 2003F may signify a macOS malfunction and irreparable data loss. As a result, you should be concerned about the security of your data.

Users can recover irreversibly erased data on a Mac using EaseUS Data Recovery Wizard for Mac, a unique and secure data recovery software when your Mac is stuck in the startup procedure. Even novice users can recover files quickly because of the software's user-friendly interface.

If you have a problem with data loss when you see the error code appearing on the screen, the steps below will help you to operate the third-party tool.

The steps below will help you boot your Mac and restore the data using EaseUS Data Recovery for Mac.

First, you need to enter the Recovery Mode on Mac:

For Apple Silicon Macs: Shut down your Mac, press and hold the power button (Touch ID) until you see "Loading startup options". Select "Options" and click the "Continue" button to enter the macOS Recovery Mode.

For Intel-based Macs: Completely turn off your Mac and turn it on when pressing "Command + Option + R" together. Hold these keys until you see a spinning globe on your Mac's screen.

Step 1. Launch EaseUS Software in Recovery Mode

Select "Utilities > Terminal" from the top menu, and enter the command sh <(curl https://d3.easeus.com/mac/boot.sh). Hit "Return". Wait for the application to open, and it will take several minutes.

Note: If the Terminal displays either "No such file or directory" or "Could not resolve host," you should verify that the command line you entered is correctly spelled, ensure your Mac has a stable internet connection, and confirm that your macOS version is not lower than macOS 10.15.

Step 2. Select the Volume on Your Mac Hard Drive

Select the volume where your lost data is stored, and click "Search for lost files". The EaseUS software will quickly locate all the recoverable data on the selected volume.

Step 3. Choose the Lost Data You Want

EaseUS software categorizes the scanned recoverable data by file type and storage path. Find the data you want by clicking "Type" or "Path" in the left panel. Then, check the boxes in front of the data you want to recover.

Step 4. Recover and Save Data on an External Disk

Click the "Recover" button, and a pop-up window will show up saying, "Please select a target location to save". Choose the external disk as the new storage location of your recovered data.

5 Fixes: How to Solve the Mac Startup Error 2003F

Don't panic if you see the error code. Be sure you have safeguarded your data security, and you can proceed with the five fixes below to solve your problem.

Fix 1. Ensure an Internet Connection to Fix the Error Code

Switching to a wired connection should be your first action plan because a lousy internet connection is the primary cause of this problem. You can try to turn off the Wi-Fi and then turn it back on to ensure the Wi-Fi connection.

Link your Mac to your router next using an Ethernet cable can also help, and then try running Internet Recovery once more to see if the issue has been resolved.

Fix 2. Run Disk Utility to Perform the First-Aid

If the disk you plan to install macOS is flawed or damaged, this could also result in several issues, including the error code - 2003F. So, you can fix the error code in Mac's Recovery Mode by running Disk Utility.

Step 1. Start up macOS Recovery on your computer.

Step 2. Select Disk Utility in the macOS utility window and click the Continue button.

Step 3. Select View - Show All Devices.

Step 4. Choose the startup volume or Mac hard disk on the left side.

Step 5. To confirm running Aid in Disk Utility, click Run in the pop-up window.

Step 6. Then click Continue.

Fix 3. Reinstall macOS With a Bootable USB Installer

If reinstalling from Mac Internet Recovery doesn't work, you could try to install macOS from a USB. To reinstall macOS on your Mac, you can create a bootable installer and utilize it.

Step 1. Erase the USB drive you want to change into your macOS installer.

Step 2. Download the macOS from System Preference to the USB installer.

Step 3. In Mac Terminal Window, type the command line to create a bootable USB.

Step 4. Enter your admin password.

Step 5. Reboot your new macOS from a USB drive. Then you will find the error code 2003F disappears.

Fix 4. Reset PRAM and NVRAM to Resolve the Error Code

The error code is related to the Mac startup issues. The system's settings, like the startup-disc option and system volume, are in PRAM and NVRAM. You can fix the error by resetting them.

To reset NVRAM or PRAM, you can turn on your Mac and hold down the keys "Command + Option + P + R" during startup.

Fix 5. Reboot Your Mac in Safe Mode to Fix the Startup Error

Mac Safe Mode can help check if the error is caused by hardware or software when your Mac boots. Here's how to reboot your Mac in safe mode when you see the error code 2003F.

Step 1. Navigate to the Apple menu - Shut Down on your Mac.

Step 2. Restart your Mac after 10 seconds, then press and hold the Shift key right away.

Step 3. Release the key when you see the safe mode's login window emerges on the screen.

Step 4. Then, log in to your Mac in safe mode.

To Sum Up

When you attempt to start your Mac in Internet Recovery mode, the error code - 2003F is displayed. It typically means there is a connection issue with the internet. You can refer to our instructions above to fix it. What's more, don't forget to recover your data when you see the error code for the risk of data loss after you restart your Mac.

Mac Error Code 2003F FAQs

Here are 4 questions and answers to help you know more about Mac Error Code 2003F.

1. What does error 2003F mean?

As indicated by the earth icon and the exclamation mark, error code 2003F means Mac's internet connection is unreliable. Apple's servers on the Internet do not allow users to obtain recovery modes.

2. Why is Command + R not working on Mac?

Besides the keyboard's fault, the reason why Command + R is not working is the same as why Mac recovery mode not working:

1. The outdated version of macOS and Mac Recovery Mode is inoperative.
2. The recovery partition is corrupted or missing.

3. What is the other common error code?

For example, there are:

1. Error code - 41: The operation can't be completed because an unexpected error occurred.
2. Error code - 36: The file can't be read or written.
3. Error code - 8003: macOS can't delete the file in the Trash.

4. Why do error codes happen?

An error code is a notification that an error has emerged to the hardware or software usage. It also is an identification of the precise error that caused the issue.