DiskPart Format: How to Format Hard Drive Using DiskPart [Free]

When your hard drive becomes inaccessible, needs to be formatted, or requires clean up for a certain purpose, you can clean internal and external hard drives using the DiskPart format command by following our instructions. For an easier option, you may also try a third-party free formatting tool like EaseUS Partition Master Free for help. It can be your best choice in formatting and cleaning your hard drive in Windows 10/8/7.

Here on this page, we'll include two free methods, diskpart format command and free third-party manager, to help you quick format or fully clean up a hard drive on Windows 10/8/7 with ease:

Formatting hard disk, USB flash drive, pen drive, and memory card, etc., is meaningful and helpful in solving some device issues. For examples:

1. 1. Incompatible or unsupported file system on a hard drive blocks the computer from recognizing it. 
2. 2. Switch hard drive format, change hard drive to NTFS, FAT32, exFAT, etc., for specific usage.
3. 3. Restore the drive to full size when it only shows partial storage or half-size.
4. 4. Fix RAW, corrupted, or inaccessible errors on hard drives.

DiskPart Format Command and Alternative - DiskPart vs EaseUS Formatter

Generally, there are three ways to initiate the task:

• Windows quick format (by using File Explorer or Disk Management)
• Windows DiskPart command
• A free third-party hard drive format tool - EaseUS Partition Master

Click to download EaseUS formatting tool for free here:

Windows quick formatting is easy to get started but with limited functions, so the latter two options become better choices. Check the comparison list between DiskPart Format Tool and EaseUS Partition Master, and learn which is better for you to refer to:

Your Quick Guide:

• As a beginner, you can trust the free formatting tool as a DiskPart alternative to format disk in Fix 1. 
• For experienced users, running the DiskPart command to format the disk is quick with instructions in Fix 2.

Fix 1. Format Disk CMD Alternative - EaseUS Partition Master

The other easier way to format disk, compared to Diskpart, is to apply a free DiskPart alternative formatting tool for help. Here we'd like to recommend you try EaseUS Partition Master Free.

It enables you to quickly format or clean up an internal HDD, an external USB stick, pen drive, or an SD card, etc. within only a few simple clicks. 

The whole process is simpler and smoother than formatting a hard drive using the DiskPart command prompt.

# 1. 4-Steps: Quick Format Hard Drive using DiskPart Format Alternative 

Download EaseUS free disk formatting tool and follow the guide below to see how to format the disk.

Step 1. Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose "Format".

Step 2. In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size for the partition to be formatted, then click "OK".

Step 3. Then you will see a warning window, click "Yes" in it to continue.

Step 4. Click the "Execute 1 Task(s)" button to review the changes, then click "Apply" to start formatting the partition on your hard drive.

Does this fix work? If you have removed your issue, you can share this article to help more people.

Fix 2. Format Hard Drive Using DiskPart Format Command

To use DiskPart to format a disk, you need to follow the commands below carefully. Any mistakes will cause serious problems.

Here we'll take the method of formatting hard drive using CMD on Windows 10 as an example to show you to detail steps:

#1. Format Disk Using CMD - DiskPart Quick Format Command

How to format disk using CMD:

Step 1. Right-click on the Windows icon, select "Search" and type: command prompt.

Right-click on Command Prompt and select "Run as administrator".

Step 2. Type diskpart in Command Prompt and hit Enter.

Step 3. Type format command lines in DiskPart and hit Enter each time so as to quick format the hard drive:

• list disk
• select disk 2 (Replace 2 with your disk number)
• list volume
• select volume 10 (Replace 10 with the volume number of the partition that you want to format)
• format fs=ntfs quick(If you need to format a hard drive partition to FAT32 or other file systems, replace NTFS with FAT32, exFAT, etc.)

Step 4. Type exit and hit Enter to close the program when DiskPart reports it has successfully formatted the volume.

That's a complete guide to formatting a hard disk with DiskPart quick format commands.

Video Tutorial: How to Format a Drive using CMD Format Command

 

#2. Fully Clean and Format Disk Using CMD Command in DiskPart

If you prefer to completely wipe the hard drive, clean and format a hard drive using the CMD command, follow the operations using DiskPart for help.

Step 1. On Windows 10, press Windows + X, select "Search", and type command prompt, right-click on it and choose "Run as administrator".

Step 2. On the Command Prompt black window, type diskpart and hit "Enter".

Step 3. Now type list disk and press "Enter".

All the disk drives will be listed, including your external drives that are connected to the computer.

Step 4. Type select disk + disk number, for example, select disk 2 and press enter.

It tells DiskPart to locate and lock disk 2 so as to clean and format it with the continuing steps.

Step 5. Go on to type clean. This step starts to clean up all files and folders on the selected hard disk.

Step 6. Type create partition primary and press "Enter".

Step 7. After DiskPart successfully created the specified partition, type format fs=ntfs (or format fs=exfat) and press "Enter".

It tells DiskPart to format the disk to a specific file system, let it be NTFS, exFAT, etc.

Step 8. At last, assign a drive letter to the newly created partition by typing assign.

Step 9. Type exit to close the DiskPart Command Prompt window when the process finishes.

Bonus Tip: Clean Up Hard Drive by Erasing Disk

Compared to the DiskPart clean command, EaseUS BitWiper - a newly released disk wipe software by EaseUS simplifies the whole process of cleaning up a hard drive.

With it, you can simply erase everything on a hard drive, leaving it as an empty new drive with full size:

Step 1. Run EaseUS BitWiper. Click the "Wipe Disk" tab.

Step 2. Select the targeted HDD or SSD to wipe.

Notice: Please make sure you have chosen the correct HDD or SSD. Once the wiping starts, your data is irrecoverable.

Step 3. Choose Wiping Method and click "Next".

Choose a suitable wiping method. Recommend EaseUS Secure Erase!

Step 4. Check the warning message and click "Wipe" to confirm.

Step 5. Wait for wiping finish and click "Done".

Bottom Line - How to Format A Drive in Hard Disk with Run

On this page, we included two major free methods to help you clean and format a hard drive disk: DiskPart format command lines and DiskPart alternative - EaseUS free formatting tool.

According to many Windows managers and experienced users, you may also try to format a hard drive by using File Explorer and Disk Management on your own.

For quick and smooth operation, EaseUS Partition Master Free should be your best shot.

People Also Ask About Diskpart Format Command

If you are having further DiskPart formatting questions, check the following questions and listed answers for help.

1. How do I use Diskpart?

As DiskPart can execute many operations via different command lines, here we concluded a few of them to help you managing hard disk.

To create a partition: (Open Command Prompt and hit Enter each time.)

• diskpart
• list disk
• select disk 1
• create primary partition size=10000mb (or more)
• format fs=ntfs (or other file systems)
• assign letter=D (or other drives)
• exit

You may also run the DiskPart command to perform the following operations:

1. #1. Show hidden files using CMD
2. #2. Check and fix disk error using cmd
3. #3. Recover deleted files using command prompt
4. #4. Fix and repair hard drive errors using CHKDSK command

2. How long does DiskPart take to format?

Being it similar to the Windows formatting feature, you can always apply DiskPart format command to format a hard drive within minutes or half an hour, depending on the hard drive capacity and used space on it.

As estimated, to do a 'full' format on a 1TB hard disk in Windows, will take a long time, like 2- hours, and over a USB 2.0 connection, it may take a day!

3. What is the command to format a partition with the NTFS file systems?

Follow the process to format a partition with NTFS file system:

1. 1. Right-click Windows icon, "Search", and type "CMD" and then right-click Command Prompt to select "Open as Administrator"
2. 2. Type "list disk" into the command prompt without quotes and hit Enter.
3. 3. Type "select disk 1" without quotes and hit Enter. (Replace 1 with the disk number of your own hard drive.)
4. 4. Type "list volume" without quotes and hit Enter. 
5. 5. Type "select volume 1" without quotes and hit Enter. (Replace 1 with the target partition number on your drive.)
6. 6. Type "format d: /fs: ntfs quick" without quotes and hit Enter. (Replace d: with the drive letter of your target partition.)
7. 7. Type "exit" and hit Enter to close the command prompt.

For further resolutions, check the How-To page or use the Search option on our website - https:www.easeus.com to find more exact solutions bases on your issues. 

4. How to format a USB flash drive using CMD? - Quora.com

Step 1. Connect USB to PC and press Windows + R keys.

Step 2. Type cmd in the Search box and hit Enter to bring up Command Prompt.

Step 3. Type the following command lines one by one and hit Enter each time:

• diskpart
• list disk
• select disk + X (Replace X with the number of your USB drive.)
• list volume
• select volume + N (Replace N with the volume number of your USB flash drive.)
• format fs=ntfs quick (You can also replace NTFS with FAT32 or exFAT.)
• exit