Is your Windows installation not detecting SSD? This article will explain the five best ways to fix this problem. Keep reading to know more about this error and what causes this error to happen. EaseUS Data Recovery Wizard comes in handy.
Installation of Windows on SSD optimizes a Windows PC's performance. But what's annoying is the "Windows installation not detecting SSD" error. There are several reasons why an SSD spinning can't be detected! The common reasons are that the SDD isn't linked with the two most ordinary NTFS or FAT32 systems, which most PCs identify, and they can sometimes be shown as RAW. Another reason is there might be a physical connection, which causes errors with the connections between the PC and the drive.
Have you lost your data due to this issue? When installing Windows, some files could be erased. There's also an exceptionally significant chance of data loss. Users should prioritize protecting their personal information's privacy first. Hence, the most useful tool to employ is EaseUS Data Recovery Wizard, an advanced retrieval program.
Moreover, in case your SSD is spinning but the installation of the new Windows OS can't detect the SSD, you may still retrieve data from it. A few leading software are available in the market to execute the work. But the best one is EaseUS Data Recovery Wizard, which can safely retrieve your data from your SSD.
It can be also used to create a WinPE bootable USB in case the computer refuses to load, which will allow recover data from SSD that won't boot.
The major highlights of this professional data retrieval software are the following:
Step 1. Scan the SSD
Open EaseUS Data Recovery Wizard, select the SSD where you lost data, and click the "Search for Lost Data" button.
Step 2. View the results
When the scanning finishes, find lost SSD data by using the "Filter" and "Search" options after checking the "Deleted Files" and "Other Lost Files" folders.
Step 3. Recover SSD files
Select desired data and click the "Recover" button to get back lost SSD files.
💡Tip: You can restore data on the local disks, external hard drives, and also the cloud storage.
You may need a video tutorial that helps you finish the whole troubleshooting process so here is the time stamp:
Download this professional data retrieval software now! Also, if you find this tool useful, make sure to share the information with your friends on social media.
When "Windows installation not detecting SSD" happens, you can't install the latest or older version of Windows OS on SSD. It's worth knowing that Windows not identifying the SSD is the main thing that you can't install Windows on a built-in SSD. So, these are the top 5 ways to fix Windows installation not detecting SSD:
You will obtain the Windows 11 installation not detecting SSD error in case the boot mode of the PC isn't right for the SSD. In that case, all you need to do is enter the BIOS; after that, alter the boot mode by going through the steps:
Step 1. Enter the BIOS setup screen.
Step 2. Move to the "Boot" tab on the main BIOS menu.
Step 3. Hit "UEFI/BIOS Boot Mode" under the tab, and then opt for "UEFI."
Step 4. Press the "F10" and "Enter" keys to save the alterations and exit the screen.
Step 1. Turn your PC off and on again. Keep pressing the "BIOS" key, for example, Delete, F1/F2/F10/F11/F12, Esc to enter BIOS. The PC's BIOS key will be displayed at the bottom of the screen after the PC restarts.
Step 2. Go to your PC's "BIOS settings" and verify if the SSD is demonstrating in BIOS.
Step 3. Your BIOS's "Storage Configuration" settings are where you'll find the "SATA port" options. Make sure they're activated.
Here Are the Solutions to Fix NVME SSD Not Detected (Windows/Mac)
You can read this complete guide no matter what undetected scenarios you encounter. This guide provides you with tried-and-true solutions for you to fix NVME SSD not detected error.
In case the Windows 11 install is unable to detect SSD error during the installation, these are the important steps to follow:
Step 1. Hit the "Shift + F10" keys to launch "Command Prompt."
Step 2. Type the below–mentioned commands in the Command Prompt window, and hit "Enter" after each:
Step 3. Now, you will notice the SSD drive at the Windows setup.
The warning message that states "We did not locate any drives" appears during failed Windows 11 installation if Windows cannot detect the SSD. Select Load driver" to obtain a storage driver. Follow the prompts and choose the Load driver option in the left corner of the Windows Setup window.
Now, you need to wait for a while and verify if Windows spots the SSD. If not, proceed to the following restoration method.
Step 1. Click and hold the Windows logo to bring up the "Start" option. Tap the "Device Manager" button after that.
Step 2. Broaden the category of "Disk Drives" by double-clicking.
Step 3. Hit the "Update Driver" option after right-clicking on the SSD driver.
Step 4. Opt for "Search automatically for drivers" in the subsequent window, and go through the on-screen prompts to update the driver.
Installing Windows 11/10/8/7 on an SSD will unquestionably increase your computer's efficiency and performance. If Windows could not be installed on an SSD, that would be a problem. However, these are the top 4 reasons for the error "Windows installation not detecting SSD":
❎SSD isn't identified by the UEFI or BIOS firmware
It happens due to faulty or loose data cables. If the NVMe or SATA data cable linking the SSD to the motherboard is corrupted or loose, the BIOS can't identify the drive.
📂Corrupted ISO file
Issues with any third-party software may corrupt the ISO file. If the system files get damaged, so does the ISO file. Therefore, a corrupted ISO file ensues this "Windows Installation Not Detecting SSD" error.
📏Improper formatting of the SSD
A newly purchased SSD drive won't appear in Windows if it hasn't been configured to a partition style. Often, disk startup is the reason why the freshly installed SSD is not detected. Windows may identify the SSD once again if the SSD is formatted to a compatible file system.
❔The essential drivers for the SSD aren't installed
In case you're using an IDE SSD, you don't have to install a driver. But if it's an SSD and the necessary drivers aren't installed, it will bring forth this issue.
SSDs and Windows 11/10 are two examples of novel innovations that you may find enjoyable due to their significant advancements over their predecessors. Any of the techniques above can help you install the latest OS on your new SSD. But if "SSD not detected on Windows" happens, and it leads to data loss, EaseUS Data Recovery Wizard will be an effective tool to install.
These are the FAQs to consider in order to understand the topic better:
1. Why is Windows not detecting my SSD during installation?
The reason might be having a poor SSD cable connection. It's possible that your computer isn't configured to detect fresh SSDs. Verifying using the UEFI/BIOS may represent a useful method.
2. How do I fix SSD not detected in Windows?
In that case, you need to update the SSD drivers with the help of these steps:
3. Why is my SSD not showing up in BIOS after Windows installation?
The BIOS will not recognize an SSD if the data cable is broken or the link is made incorrectly. Particularly with serial ATA cables, connections can occasionally get loose.
4. Why is Windows installed not booting from an SSD?
The SSD is unable to boot due to the wrong boot mode. In order to configure it to start in EFI/UEFI mode, you must access BIOS Setup. If not, the SSD can only be used for booting once it has been reformatted to an MBR drive.
Related Articles
How to Recover Cache Files on Android SD Card
How to Recover Data from Encrypted (EFS) Hard Drive Partition in Windows | 2024
Fix Hard Drive Disappeared in Windows 10 No Data Loss
Undo Disk Cleanup in Windows, No Data Loss