How to Run SSD Performance Test on Windows 11/10 (with Pictures)

Three ways to run SSD performance tests: two are modern software - EaseUS Partition Master and CrystalDiskMark, and the other is a built-in utility - Command Prompt. With these ways, you can check SSD performance on Windows 11/10 easily and quickly.

State Solid Drives (SSDs) are known for their read and write speeds. However, over a period of time, users may experience the slow performance of their SSDs and lag in their daily tasks. It can happen due to different SSD issues, such as slow reading and writing speed, less memory space, cooling deficiency, etc. 

The question may come to your mind, how do you run SSD performance test without pulling it out from the system? Well, EaseUS will help you to find the answer. Keep reading to learn everything about SSD performance and three solutions to check SSD performance on Windows 11/10. 

What Does SSD Performance Test Mean

SSD performance is the way it affects a computer or game. SSDs mainly affect a computer's boot time, data transfer, and broadband speed. Generally, standard SSDs can reach speeds of up to 500 MB/s to perform the same operation. NVME SSDs, on the other hand, can show speeds of up to 3,000 to 3,500 MB/s.

SSD performance tests are usually referred to as SSD speed tests and include the following metrics:

• SSD Throughput: It measures the data transfer rate of the drive.
• SSD Read/Write Speed: It calculates the input and output performance of the SSD.
• SSD Latency: This will provide the results of the SSD response time.
• In addition, there is SSD 4K as well as 64 threads that can be used to measure SSD speed.

All of the data affect SSD performance. If you want to know how to test and maintain SSD performance, read on, and we will provide three ways to help you with SSD speed testing on Windows 11/10.

3 Ways to Run SSD Performance Test 

It's necessary to check SSD performance regularly. In this part, we will introduce three different methods - two third-party tools and one Windows built-in tool. Check the following table for a quick comparison of the three methods based on the following aspects:

As you can see in the table, CMD provides only general results of your disk's read and write speeds. On the other hand, EaseUS Partition Master has better usability, detailed results, and is easy to use. While CrystalDiskMark requires more knowledge about SSD performance terminology for you to use.

We will give all the detailed steps for the three ways. Continue reading, and you can choose the best solution you like to check SSD performance on Windows 11/10.

Way 1. Run SSD Performance Test via EaseUS Partition Master

EaseUS Partition Master is one of the best SSD benchmark tools to measure the health and performance of your SSD. It is compatible with all Windows versions, and its simplistic user interfaces make it more convenient for all users.

Using this tool, you can perform more accurate tests and see how fast your SSD is. Its DiskMark feature is remarkably designed to measure the real-time read and write speeds of your SSD.

Download EaseUS Partition Master and follow the steps to run SSD Performance Test:

Step 1. Launch EaseUS Partition Master. And click the download button to activate the "DiskMark" feature under the "Discovery" section.

Step 2. Click on the drop-down box to choose the target drive, test data, and block size.

Step 3. Once everything is configured, click "Start" to begin the disk test. Then, you can see the Sequential or Random read/write speed, I/O, and Delay data.

As a very sophisticated disk management tool, EaseUS Partition Master also has the following features:

• Format New SSD
• Run HDD benchmark
• Migrate OS to SSD
• Check SSD health
• Test M.2 SSD performance
• Resize/delete partitions on SSD
• Analyze disk space on Windows 

Whatever partition errors you meet, you can resort to EaseUS Partition Master. You can manage your SSD and hard drives better with this powerful tool. If you like it, you can also click the button below to share it with other people in need.

Way 2. Run SSD Performance Test via CrystalDiskMark

CrystalDiskMark is a useful benchmarking utility. It can be used to test the read-and-write performance of your computer and can also be used to diagnose problems. It can test all devices, including external drives, HDDs, SSDs, and more. However, before using this feature, you need to be familiar with its terminology and functions.

You can then follow these steps for SSD speed testing:

Step 1. Download and open CrystalDiskMark.

Step 2. Select the number of runs, test size, and target disk as needed.

Step 3. Click "All" to perform the SSD performance test.

Way 3. Run SSD Performance Test via CMD

Command prompt (CMD) is a built-in utility in Windows computers and can run as an interpreter tool to test your SSD performance. Users can do this task by following the given steps. 

Note* To prevent any potential issues. It is necessary to follow each CMD step carefully.

Step 1: Press the Windows key, click the search bar, and type Command Prompt.

Step 2: Click the Run as administration option.

Step 3: Paste or type the command to test the SSD speed.

winsat disk -drive c (C is the drive letter here. You can replace it with another drive letter that you want to check.)

Step 4: Press enter and wait to see the detailed results. Once the process end, you will see the direct read and write speeds of your SSD.

You see, all the steps are quick and straightforward. But if you are unfamiliar with how CMD works or how to use its commands, we recommend you use the first method:

You may face unexpected data loss if you insert the wrong CMD command. If you prefer to command prompt, you may also like the following topics:

What to Do After SSD Performance Test

You can get accurate SSD read and write speed results whichever way you test your SSD. You can check if SSD performance is dropping by comparing standard speed tests: common read and write speeds for SSDs are 300-600MB/s; SSD health at 99% is normal. When the SSD health or speed is low, you can improve the response time by upgrading the memory or the SSD to change the computer's performance.

In addition, we have given some extra tips. You can improve SSD read and write performance by following these methods:

• Extend the partition for more space
• Check TRIM support
• Optimize the SSD
• Select high-performance mode
• Update SSD firmware

If you want to know the specific solution, please click the link below to view it.

Conclusion

We hope the article helped you to understand how to test your SSD performance and why it's essential to check. You can run a test on every SSD using any of the solutions mentioned in this article. Both solutions are helpful, and the step-by-step guides have introduced how to use them. If you find that your SSD is slowing down, you can also improve SSD read and write speed with EaseUS Partition Master.

In addition, EaseUS Partition Master is easier than CMD to use. If you want a compatible and quick solution, it is recommended to use this tool.

FAQs About SSD Performance Test

If you have further questions about SSD Performance Test, check this FAQs section to find answers.

1. How do I check my SSD performance?

Press Windows + X keys and select Task Manager from the list. Find and click the Performance tab. Select the SSD drive from the left column to check the performance. You will encounter the live graph and listed amount of the read and write speeds of your SSD.

2. Can you test an SSD?

Yes, it's easy to test your SSD using the Command prompt. It is also known as the CMD utility in Windows. To test an SSD using CMD, open the Windows Search bar, type Command Prompt, and click Run as administrator. Write this command "winsat disk - drive c" and hit enter.

3. What is good SSD performance?

The latest M. 2 NVMe SSD provides the fastest performance with speeds up to 7GB/second. These SSDs facilitate users to transfer a huge amount of TB data in minutes.